Expansion Joints JHR 6.20
Seismic expansion joints
Special Wide-Width Floor Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- All-metal floor expansion joint
- Special for large widths
- For opening joints between 135 and 340 mm
All aluminum seismic floor expansion joint for exterior and interior. The aluminium inner parts slide between them, thus absorbing three-dimensional movements: horizontal, vertical and shear. Interchangeable aluminium tops with the option of a nitrile levelling strip.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Description
Reviews (0)
Shipping & Delivery
Related products
Expansion Joints JDH 5.02
Floor joints with insert
Aluminum Floor Expansion Joint
MATERIAL:Â Aluminium
Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Standard Floor Expansion Joint
- Smooth Insert Option
- For opening joints up to 60 mm
Standard floor expansion joint for exterior and interior made of pre-drilled aluminum angles and an interchangeable central flexible insert to absorb expansion movements. Can be used for any type of finish: concrete, screed, tiles, etc. Suitable for light traffic, it will also be suitable for the passage of light trolleys with tyres and non-intensive traffic of light vehicles.
Expansion Joints JDH 5.02 with Hoods
Floor joints with insert
Aluminum Floor Expansion Joint
MATERIAL:Â Aluminium
Nitrile
Brass or stainless steel
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Standard Floor Expansion Joint
- Smooth Insert Option
- For opening joints up to 60 mm
Floor expansion joint for exterior and interior made up of aluminium angles, an interchangeable flexible insert and metal covers in stainless steel, brass or aluminium, for all types of finishes: slab, screed, tile, etc. Suitable for light traffic, it will also be suitable for the passage of light trolleys with tyres and non-intensive traffic of light vehicles.
Expansion Joints JDV 4.08
Special Vertical Expansion Joint External Insulation
Vertical expansion joint
MATERIAL:Â PVC
Nitrile
COLOUR:Â White
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Vertical expansion joint
- Special insulation from the outside
- For 30 mm opening joints
Specially designed for the treatment of expansion joints in buildings made with external insulation.
It consists of:
- a fibre mesh for perfect adhesion to the plaster and easy positioning,
- a nitrile membrane to ensure the tightness of the system,
- a cladding of UV-resistant PVC closing profiles.
Expansion Joints JDV 4.04
Galvanized Steel Exterior and Interior Wall Expansion Joint
Steel expansion profile with nitrile insert
MATERIAL:Â Galvanized steel
Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- For 30 to 50 mm opening joints
- Laying under plaster
- Recessed vertical expansion joint
Vertical expansion joints in galvanized steel for facades, walls and ceilings composed of two pre-drilled recessed galvanized steel angles and an interchangeable flexible nitrile insert to absorb small multidirectional movements.
Expansion Joints JDV 4.03
Aluminum Seismic Vertical Expansion Joint
All-metal expansion joint
MATERIAL:Â ALUMINIUM
COLOUR:Â NATURAL
RAL COLOURS
MODEL:Â FLAT AND ANGLE
CHARACTERISTICS:
- For opening joints from 50 to 100 mm
- Seismic expansion joint
- Vertical wall and ceiling installation
Anodized aluminum seismic expansion joint for facades, walls and ceilings. Composed of a support fixed on one side only and an aluminium covering profile, this seismic joint cover absorbs expansion, contraction and shear movements.
Expansion Joints JDV 4.02
Vertical expansion joint for facades, walls and ceilings
Seismic expansion joint for vertical application
MATERIAL:Â Aluminium
COLOUR:Â Natural
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- For opening joints from 40 to 200 mm
- Seismic expansion joint
- Vertical installation of façade, wall and ceiling
Seismic vertical expansion joint in anodized aluminum composed of pre-drilled angles and a central part that allows ample movements to be absorbed.
It is ideally suited for application on walls, facades and ceilings. Available in 3 ml length.
Expansion Joints GASKET COVER CJ Brass
Brass joint cover
MATERIAL: Brass COLOR: raw press MODEL: Dish only CHARACTERISTICS:- Aesthetic, decorative and economical.
- Easy and quick to install, without drilling or gluing.
- For opening joints from 10 to 60 mm.
Expansion Joints GASKET COVER CJ Inox
Stainless steel joint covers
MATERIAL: Stainless steel
COLOUR: polished glossy | raw | grain leather | brush grit 220
MODEL: Flat
CHARACTERISTICS:
- Aesthetic, decorative and economical
- Easy and quick to install, without drilling or gluing
- For opening joints from 10 to 50 mm
Stainless steel clip-on joint covers are designed to protect and aesthetically clad the joints of facades, walls and ceilings. Easy and quick to install, they do not require drilling or gluing.
Reviews
There are no reviews yet.