Expansion Joints JHR 6.20
Seismic expansion joints
Special Wide-Width Floor Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- All-metal floor expansion joint
- Special for large widths
- For opening joints between 135 and 340 mm
All aluminum seismic floor expansion joint for exterior and interior. The aluminium inner parts slide between them, thus absorbing three-dimensional movements: horizontal, vertical and shear. Interchangeable aluminium tops with the option of a nitrile levelling strip.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Description
Reviews (0)
Shipping & Delivery
Related products
Expansion Joints JHR 5.08
Floor joints with insert
Aluminum Floor Expansion Joint
MATERIAL:Â Aluminium
Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Reinforced Floor Expansion Joint
- Special for large widths
- For opening joints up to 125 mm
Wide-width floor expansion joint for outdoor and indoor use made of aluminium angles and 2 interchangeable flexible nitrile inserts for any type of finish: expansion joint for slabs, screeds, tiles, etc.
Expansion Joints JDH 5.06
Floor joints with insert
Special Wide-Width Floor Expansion Joint
MATERIAL:Â Aluminium
Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Special wide-width floor expansion joint
- For opening joints from 100 to 200 mm
Floor expansion joint made of aluminium angles and a smooth interchangeable central flexible insert, black or grey (other colours on request) to absorb expansion movements. Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc. For indoor or outdoor floor joints.
Expansion Joints JDV 4.16
Seismic Expansion Joint for Suspended Ceilings
Expansion joint for suspended ceilings
MATERIAL:Â aluminium
Vulcanized thermoplastic
MODEL:Â Flat
Angle
CHARACTERISTICS:
- For opening up to 250 mm
- For false ceilings
- Seismic expansion joint
Seismic expansion joint for suspended ceilings with 50% movement.
Composed of two aluminium angles and a flexible TPV insert. To ensure a better hold, a self-centering pivot is available from the 150 mm opening.
The hangers are not supplied with the ceiling expansion joint.
Expansion Joints JDV 4.04
Galvanized Steel Exterior and Interior Wall Expansion Joint
Steel expansion profile with nitrile insert
MATERIAL:Â Galvanized steel
Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- For 30 to 50 mm opening joints
- Laying under plaster
- Recessed vertical expansion joint
Vertical expansion joints in galvanized steel for facades, walls and ceilings composed of two pre-drilled recessed galvanized steel angles and an interchangeable flexible nitrile insert to absorb small multidirectional movements.
Expansion Joints JDV 4.02
Vertical expansion joint for facades, walls and ceilings
Seismic expansion joint for vertical application
MATERIAL:Â Aluminium
COLOUR:Â Natural
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- For opening joints from 40 to 200 mm
- Seismic expansion joint
- Vertical installation of façade, wall and ceiling
Seismic vertical expansion joint in anodized aluminum composed of pre-drilled angles and a central part that allows ample movements to be absorbed.
It is ideally suited for application on walls, facades and ceilings. Available in 3 ml length.
Expansion Joints PSO
Flexible sealing profiles
MATERIAL:Â Nitrile
COLOUR:Â Black
Grey
RAL shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Cost-effective product, quick installation
- For non-circulatable horizontal and vertical joints
- For opening joints between 10 and 120 mm
Recessed flexible blanking profiles are ideal for the quick and economical construction of vertical joints, exterior or interior, or ceiling joints.
The PSO flexible profiles are installed, which allows for a quality finish. They can also be glued.
Expansion Joints GASKET COVER CJE-PF
Extruded, drilled and milled joint covers
MATERIAL:Â Aluminium
COLOUR:Â PAL Shades
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Economical joint cover, easy and quick installation
- For new work and renovation
- For opening joints up to 250 mm
CJE-PF joint covers are designed to protect and cover floor joints but can also be used on facades, walls and ceilings. Aesthetic, decorative and economical, they can be used indoors or outdoors. Pre-drilled and milled, they are easy to install, and are used in new work and renovation for joints from 10 to 250 mm of opening.
Expansion Joints GASKET COVER CJ Alu
Aluminum joint covers
MATERIAL: Aluminium
COLOUR: Natural
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- Aesthetic, decorative and economical
- Easy and quick to install, without drilling or gluing
- For opening joints from 10 to 120 mm
Aluminium clip-on joint covers are aesthetic, decorative and economical.
Easy and quick to install, without drilling or gluing, they have different clip models (S, SLL, XL or XXL) suitable for all joint openings from 10 to 120 mm.
Reviews
There are no reviews yet.